This instrument has the advanced machine design and MCU controller
to give the correct result.display shows the blue backlight,
high-light LCD display make you see the result easily.
This instrument makes the rotor rotate in the same speed by torque
sensor. The speed of the electromotor is decided by the program in
SCM When the torsion which is directly proportional to sample’s
sticky resistance is equal to the force from torque sensor in
different direction, the viscosity will be showed on the LED after
This instrument has the MCU to control the capacity(rotor and
speed) and to calculate the data from the sensor before show the
value on the display clearly, at the same time show the rotor,speed
and percentage and so on.
NDJ-5S has 1,2,3,4 nubmer rotor and 6,12,30,60 r/m speed,
so has 16 combinations, so can test every value in the capacity.
1,2,3,4 number rotor (0 number rotor can test the low value)
Automatically select the right rotor and speed
Stable reading cursor
Full column cursor means the stable reading
Ac 220V±10% 50Hz±10%
Temperature 5—35°C relative humidity not larger than 80%